Performance Report
Date: 2026-11-20 · Tool: orix-bench (release build of the core package) · Machine: Mac, Apple M5 Max, macOS 27 · Threads: one
These are not iPhone measurements. They show what the algorithms cost on a fast desktop-class chip. An iPhone will be slower by a factor that has not been measured, and nothing here speaks to battery, heat or memory pressure on a phone.
Raw output: Benchmarks/results/dsp-throughput.md.
Signal processing
| Operation | Result |
|---|---|
| FFT 1024 — window, transform, scaling | 0.8 µs |
| FFT 4096 | 2.5 µs |
| FFT 16 384 | 12.8 µs |
| Live spectrum frame — 4096-point FFT, smoothing, peak hold, seven bands | 15.1 µs |
| Waveform summary with band colours, 60 s of 48 kHz audio | 14 ms (4433× real time) |
| Spectrogram, FFT 2048, hop 512, 60 s (5622 columns) | 15 ms (3904× real time) |
| Rasterise a 512 × 512 spectrogram tile through a palette table | 0.65 ms |
| BS.1770 loudness with true peak, 60 s mono | 95 ms (634× real time) |
Timings vary by a few percent between runs; an earlier run of the same binary gave 0.61 ms for the tile and 12 ms for the waveform summary.
Whole files
Ten minutes of 48 kHz stereo pink noise, 24-bit source.
| Operation | Time | Speed | Output size |
|---|---|---|---|
| Full analysis pass (levels, loudness, spectrum, speech activity, waveform) | 2.74 s | 219× | — |
| Export to WAV, PCM 16-bit | 0.10 s | 5739× | 115.2 MB |
| Export to Apple Lossless | 1.28 s | 470× | 104.6 MB |
| Export to AAC | 2.11 s | 285× | 8.7 MB |
| Noise reduction + voice enhance + export to WAV | 3.67 s | 163× | — |
(Pink noise is close to incompressible, which is why Apple Lossless saves little here; speech and music compress much better.)
Transcription and notes
| Operation | Result |
|---|---|
Transcribe about 60 s of speech (SpeechTranscriber, model installed) |
0.59–0.70 s, 82–116× real time |
| Generate notes from a one-minute transcript (Foundation Models) | about 7–8 s |
| First-time speech model download | several minutes, once per language |
What these numbers support
- Canvas and Core Graphics instead of Metal. A spectrum frame costs microseconds and a spectrogram tile is rasterised once in well under a millisecond, against a 16.7 ms frame. See visualization.
- Analysing every recording automatically. A ten-minute file takes under three seconds here.
- Encoding on stop rather than while recording. Encoding is hundreds of times faster than real time, so finishing a long session is a short wait.
Simulator observations
Not benchmarks, but worth recording:
- In the iOS 26.5 simulator (Debug build) the analysis thread produced every expected waveform bucket and spectrogram column while capturing 48 kHz stereo and 22.05 kHz mono; this is asserted in the app tests.
- No samples were dropped in any test run.
Not measured
| Item | Why |
|---|---|
| CPU while recording on an iPhone | no device |
| Battery drain per hour, screen on and locked | no device |
| Memory over a multi-hour recording | no device; by design only the waveform summary grows with duration (about 13.5 MB per hour at 48 kHz) |
| Frame rate of the live views on older iPhones | no device |
| Long-file transcription throughput | only one-minute samples were run |
| Thermal behaviour | no device |
No figure is given for any of these, and none should be inferred from the Mac results.